Hot Pressing Integrated Inductor AT 25 Series
High saturation, low impedance, low loss
Capable of handling high-frequency application environments(1MHz)
- Description
- Reliability and Failure Analysis Capability
Description
Product Features：
High saturation, low impedance, low loss
Capable of handling high-frequency application environments(1MHz)
Product specifications:
- Inductance Tolerance±20%
- Temperature:26±3℃;Humidity:≤70%RH;Frequency:100KHz~1MHz,1.0V
- ldc: DC current (A)that will cause an approximate ΔT of 40℃
- Isat: DC current (A)that will cause L0 to drop approximately ≤30%
- Operating Temperature Range -55℃ to 125℃
Product size
| P/N | L | W | T | G | C | D | E |
| AT25 series | 2.5±0.2 | 2.0±0.2 | 1.0Max | 0.7Typical | 2.1 | 0.6 | 2.6 |
| Item | P/N | L0(μH) | Rdc(mΩ) | ldc(A) | lsat(A) | |||
| Inductance (0A) | Typical | Max | Typical | Max. | Typical | Max | ||
| 1 | AT25 -1 | 1.00 | 24.00 | 29.00 | 5.50 | 5.00 | 5.50 | 5.00 |
| 2 | AT25-1.5 | 1.50 | 35.00 | 42.00 | 4.00 | 3.60 | 4.00 | 3.60 |
| 3 | AT25 -2 | 2.20 | 60.00 | 69.00 | 3.00 | 2.50 | 3.50 | 3.00 |
| 4 | AT25 -4 | 4.70 | 100.00 | 130.00 | 2.30 | 2.00 | 1.90 | 1.70 |
If you need other series of inductors, please contact us
| Equipment | Specification | Purpose |
| Temperature Humidity Chamber | Temperature:0~85℃ Humidity:10~98%RH | MSL、Humidity resistance Load life test |
| Temperature Humidity Chamber | Temperature:0~60℃ Humidity:10~95%RH | |
| Dipping Tester /solder bath | Maximum temp:300℃ | Solderability Test |
| IR Reflow | Operation temp:260℃ | Solderability/MSL |
| Voltage Insulation Tester | AC:0~5000V、DC:0~6000V | Insulation Resistance/Voltage Proof |
| LCR meter | 0.1μH~10H | Electrical Characteristic Test |
| DCR meter | 0.1mΩ~1KΩ | Electrical Characteristic Test |
| Cutting Machine | / | Cut Test |
| Solder Checker | / | Wetting Balance Test |
| Steam-aging chamber | Temperature:10-98℃ | Solderability Test |
| High Temperature Chamber | Maximum temp:300℃ | High Temperature Storage |
| Low Temperature Chamber | Temperature:-75~0℃ | Low Temperature Storage |
| Thermal shock Chamber | High Temp.:0~200℃ Low Temp:-75~0℃ | Thermal shock |
| Thermal cycle Chamber | High Temp.:0~200℃ Low Temp:-75~0℃ | Thermal cycle |
| Power Supply | V:0.01~30V I:0.01~80A | Load life |
| PCT Chamber | Temp:121℃、Humidity:100%RH Atmospheric pressure:0.2 Mpa | PCT |
| HAST | Temperature 105℃~143℃ Humidity:75~100%RH | HAST |
| Salt Spray Chamber | 35℃ 5%Nacl | Salt Spray |
| HASA Chamber | 0~60G | HASA Test |
| Grinder &Polisher Machine | / | Grind &Polish Test |
| Bending tester | Bending distance:0-6mm. | Mechanical Stress |
