JUKI Fast Smart Modular Mounter RS-1

설명

This is the ultimate all-in-one mounter.

Smart Mounter 1 For High Speed Chip Placement

Maximum speed of up to 42,000 cph. This is made possible by a revolutionary head design that reduces the travel time and distance for every placement.

The new RF feeders are 17% smaller and 50% lighter, but still maintain the same high degree

of positional accuracy. The thinner width allows up to 112 feeder inputs

Smart Mounter 2 For High Flexibility

Wide component range： RS-1 supports components from 0201*(metric) up to 74mm square or 50×150 rectangular parts. Component height up to 25mm.

Smart Mounter 3 Line Balancer

Changing the RS-1 functionality does not require head replacement.

The revolutionary design adapts to the production requirements automatically. It can be used in-line with high speed chip placement machines to improve overall line productivity or to make the line more flexible for complex PCBs with a high number of large components.

New head design automatically adjusts the centering height based on components placed.

The RS-1 uses a revolutionary new head 8 nozzle design that automatically adjusts the height based on the height of the components to be placed. This technology reduce the Z travel distance to the minimum required and increases throughput. It can adjust to 1mm, 6mm, 12mm, 20mm, or 25mm heights.

JUKI’s laser centering technology is fast, accurate and reliable for a wide range of parts.

Wide range of supported components including PLCC, SOP, MFF, BGA and many more. Size from 0201 *(metric) to 50mm square.

옵션

Recognitions system	고해상도 카메라( 10 / 27/54 mm view camera)
Oparations system	Rear-side operation unit
Conveyor	Conveyor extention*5/support pin / support sponge
Electrical protection	CE compatible specification /Ground-fault interrupter
Software*4	JaNets / IFS-NX / Flexline CAD
Component handling and feeders	Feeder Trolley（RF feeder only / RF-EF dual servo *6）/Electric tape feeder (RF/EF*7）/EF feeder adapter*6 / Electric stick feeder*7（Type-N/Type-W）/ Electric stick feeder TR8S/Tray Holder /IC collection belt /
	Tape reel mounting base( for RF/ for EF）/Splicing jig /Electric Trolley Power Station PW02*8
기타	Nozzle /Splicing tape / Bigfoot

안건			Fast Smart Modular Mounter RS-1
컨베이어 사양			기준	150mm 컨베이어 연장, 업스트림 및 다운스트림	250mm 컨베이어 연장, 업스트림 및 다운스트림
보드 크기	최소		50×50mm
	맥스	1 완충기	650*370mm(단일 클램핑)
			950*370mm(이중 클램핑)	1100*370mm(이중 클램핑)	1200*370mm(이중 클램핑)
		3 버퍼	360 *370mm	500 *370mm	600*370mm
구성요소 높이			25mm
구성 요소 크기			0201-74mm/50*150mm
배치 속도		칩(최적)	42,000 CPH
		IPC9850	29,000 CPH
배치 정확도			±35um(Cpk≧1)
피더 입력			최대 112
전원 공급 장치			AC220V-415V,3-단계
피상전력			2.2 kVA
사용공기압			0.5±0.05MPa
공기 소비량 (기준)			최대 50L/분
기계 치수 (폭 x 깊이 x 높이) ※6			1500×1,810×1,440mm	1800×1,810×1,440mm	2000×1,810×1,440mm
대량의 (약)			1,700킬로그램