AM Inductor

Induktor bersepadu AM 62 Siri

Induktor bersepadu AM 61 Siri
Induktor bersepadu AM 63 Siri

High saturation, low impedance, low loss

Capable of handling high-frequency application environments(1MHz)

Kategori: ,

Penerangan

Ciri -ciri produk：

High saturation, low impedance, low loss

Capable of handling high-frequency application environments(1MHz)

Product specifications:

  • Inductance Tolerance±20%
  • Suhu:26±3℃;Humidity:≤70%RH;Frequency:100KHz~1MHz,1.0V
  • ldc: DC current (A)that will cause an approximate ΔT of 40℃
  • Isat: DC current (A)that will cause L0 to drop approximately ≤30%
  • Operating Temperature Range -55℃ to 125℃

 

Product size

P/N L. W T A B H C D E
AM62 series 6.95±0.35 6.6±0.2 2.4Maks 1.6±0.3 3.0±0.3 0~+0.15 3.5 3.7 8.4
item P/N L0(μH) Rdc(mΩ) ldc(A) lsat(A)
Inductance (0A) Typical Maks Typical Maks. Typical Maks
1 AM62-1 0.20 2.20 2.8 25.00 24.00 50.00 49.0
2 AM62-2 0.22 2.60 3.2 21.00 20.00 34.00 33.0
3 AM62-3 0.33 3.50 4.1 18.00 17.00 24.50 23.5
4 AM62-4 0.47 4.50 5.1 15.00 14.00 22.00 21.0
5 AM62-5 0.56 5.90 6.5 13.00 12.00 17.00 16.0
6 AM62-6 0.68 6.20 7.2 12.00 11.00 16.00 15.0
7 AM62-8 0.81 8.30 9.5 11.00 10.00 14.00 13.0
8 AM62-10 1.00 11.20 13.5 9.00 8.50 16.00 15.0
9 AM62-15 1.50 17.00 20.0 8.50 8.00 15.00 14.0
10 AM62-22 2.20 23.00 28.0 8.50 7.00 14.00 13.0
11 AM62-33 3.30 31.00 39.0 6.00 5.50 13.00 12.0
12 AM62-47 4.70 41.00 50.0 5.50 5.00 10.00 9.0
13 AM62-68 6.80 57.00 70.0 5.00 4.00 6.00 5.0
14 AM62-100 10.00 92.00 101.0 3.60 3.10 4.00 3.5

 

If you need other series of inductors, sila hubungi kami

Equipment Spesifikasi Purpose
Temperature Humidity Chamber Suhu:0~85℃ Humidity:10~98%RH MSL、Humidity resistance Load life test
Temperature Humidity Chamber Suhu:0~60℃ Humidity:10~95%RH
Dipping Tester /solder bath Maximum temp:300℃ Solderability Test
IR Reflow Operation temp:260℃ Solderability/MSL
Voltage Insulation Tester Ac:0~5000V、DC:0~6000V Insulation Resistance/Voltage Proof
LCR meter 0.1μH~10H Electrical Characteristic Test
DCR meter 0.1mΩ~1KΩ Electrical Characteristic Test
Mesin pemotong / Cut Test
Solder Checker / Wetting Balance Test
Steam-aging chamber Suhu:10-98℃ Solderability Test
High Temperature Chamber Maximum temp:300℃ High Temperature Storage
Bilik Suhu Rendah Suhu:-75~0℃ Low Temperature Storage
Thermal shock Chamber High Temp.:0~200℃ Low Temp:-75~0℃ Thermal shock
Thermal cycle Chamber High Temp.:0~200℃ Low Temp:-75~0℃ Thermal cycle
Bekalan Kuasa V:0.01~30V I:0.01~80A Load life
PCT Chamber Temp:121℃、Humidity:100%RH Atmospheric pressure:0.2 Mpa PCT
HAST Temperature 105℃~143℃ Humidity:75~100%RH HAST
Salt Spray Chamber 35℃ 5%Nacl Salt Spray
HASA Chamber 0~60G HASA Test
Grinder &Polisher Machine / Grind &Polish Test
Bending tester Bending distance:0-6mm. Mechanical Stress